ripper
06-01-2006, 03:10 PM
This bike is a 1995 Suzuki GSX-600F Katana with ~27k miles that I've made some modifications to as listed below:
Ignition Advancer
Factory Pro Jet Kit Installed
-1 Front Sprocket
K&N Air Filter
Full Yoshi exhaust (Headers included)
Russell SS braided lines on front/rear brakes
HH brake pads
Progressive Spring Front Shocks with all new seals
GSXR-1100 fully adjustable rear shock
Custom cut rear panel bodywork
Fender eliminator
Recovered seats with Travelcade padded Leather seat covers
High Output Headlight
Flush mount turn signals
Lockhart Phillips Speedscreen (Smoke)
Pirelli Diablo Tires (Very good condition)
I have had this bike for ~5 years now and am the 2nd owner. I have always kept it covered when not riding and for the past 6 months I have had the luxury of keeping it inside a garage. I have made regular oil changes on the bike using Shell Rotella-T Synthetic 5w-40 changing the oil filter at each oil change. This is a lighter oil that allows the engine to warm up faster, the clutch shifts smoother (no slipping), and the engine revs through the RPM range more quickly.
The bike has a strong engine and is tuned for higher RPM riding. While it has plenty of grunt in the lower RPM range, it really sings at the higher RPMs. I have never used this bike for racing or stunts and is in great condition with a clean title and VIN.
There is some cosmetic damage to the left hand fairing where the bike has been dropped (see pictures). I am including a replacement fairing with the bike; however the replacement fairing will need to be painted. Also included is a spare swing-arm. I had intended to paint the new swing-arm and then swap it out with the current one on the bike, but never got around to doing so. I was hoping to do the painting this way so that I could avoid downtime on the bike.
The bike has 1 key, and I've got a disc lock that I can include as well (1 key for it as well).
Also included are Pitbull Front and Rear Stands:
Pit Bull "Newfront" Stand
Pit Bull SS rear stand Spooled/Swingarm rear stand
Asking $3500 for the package. I am located in the Austin, TX area. If interested please PM me.
Ignition Advancer
Factory Pro Jet Kit Installed
-1 Front Sprocket
K&N Air Filter
Full Yoshi exhaust (Headers included)
Russell SS braided lines on front/rear brakes
HH brake pads
Progressive Spring Front Shocks with all new seals
GSXR-1100 fully adjustable rear shock
Custom cut rear panel bodywork
Fender eliminator
Recovered seats with Travelcade padded Leather seat covers
High Output Headlight
Flush mount turn signals
Lockhart Phillips Speedscreen (Smoke)
Pirelli Diablo Tires (Very good condition)
I have had this bike for ~5 years now and am the 2nd owner. I have always kept it covered when not riding and for the past 6 months I have had the luxury of keeping it inside a garage. I have made regular oil changes on the bike using Shell Rotella-T Synthetic 5w-40 changing the oil filter at each oil change. This is a lighter oil that allows the engine to warm up faster, the clutch shifts smoother (no slipping), and the engine revs through the RPM range more quickly.
The bike has a strong engine and is tuned for higher RPM riding. While it has plenty of grunt in the lower RPM range, it really sings at the higher RPMs. I have never used this bike for racing or stunts and is in great condition with a clean title and VIN.
There is some cosmetic damage to the left hand fairing where the bike has been dropped (see pictures). I am including a replacement fairing with the bike; however the replacement fairing will need to be painted. Also included is a spare swing-arm. I had intended to paint the new swing-arm and then swap it out with the current one on the bike, but never got around to doing so. I was hoping to do the painting this way so that I could avoid downtime on the bike.
The bike has 1 key, and I've got a disc lock that I can include as well (1 key for it as well).
Also included are Pitbull Front and Rear Stands:
Pit Bull "Newfront" Stand
Pit Bull SS rear stand Spooled/Swingarm rear stand
Asking $3500 for the package. I am located in the Austin, TX area. If interested please PM me.